Stainless Steel Surface Treatments Introduction

There are some method of chemical treatment of stainless steel surfaces such as pickling, passivation, coloration etc. Today we will introduce a product can make the surface of stainless steel to appear silver white original color. That is stainless steel pickling gel.

Stainless steel pickling paste is suitable for cleaning the parts or entirety of large work piece or equipment and no suitable for the situation of liquid soaking. It is mainly used to remove the rust, oxide scale on the surface of the various types of austenitic stainless steel sheet parts and equipment and the welding stain after welding, it forms a silvery white color on the stainless steel surface after pickling and passivation, improves the corrosion resistance of stainless steel.

Precautions

Operate in outdoor or well-ventilated indoor, avoid the pickling gel contact with skin directly, if touch it accidentally, rinsing with a large amount of water.

Stainless steel is a very important part in the metal processing industry, especially in the precision metal processing industry. The surface cleanliness requirement for stainless steel work piece is very high.

Instructions

1.For cleaning of welding line oxide, first clean welding residue welding line and oily soil, then paint grease on the pretreated surface with the coating thickness is 1~2mm and resort about 1~2hours is needed, at last clean residues on the cleaning surface with cotton waste or rug (water washing is better) until bright and clean.

2.For cleanup the thick oxide on heat press end socket and surface of heat treatment accessory, first clean oily soil on the pretreated surface, then paint grease on the surface equably with the coating thickness is about 2mm and resort about 5~ 10hours is needed, at last brush with the card completely or clean residues with cotton waste ot rug (water washing is better) until bright and clean.

3.Excellent ventilation on the site during operation, the operator should wear rubber gloves & shoes and respirator. If closed environment during operation is existed, it must use ventilation system with two operators work together.

4.The grease should be charged & collected by person specially, covered for the vessel and kept vertical state.

5.Once corrode the operator's skin, water washing immediately (or washing with 5% sodium bicarbonate liquid).

 

 

Wuxi Hengda, situated in Wuxi, Jiangsu, China, is one of the leading stainless steel surface treatments manufacturers and suppliers, who can offer you the best price and excellent service. Please rest assured to buy the quality and functional products made in China from our factory.